Matter 1.6 Compatible Devices: Complete List (June 2026)
Matter 1.6 officially released on June 17, 2026. Here’s the reality: no devices ship with 1.6 support today, and most won’t for 6-12 months. But we know which manufacturers have confirmed support and which devices are likely to get firmware updates.
This is a living document. We’ll update it as manufacturers announce timelines and devices ship. Bookmark it.
Understanding Matter 1.6’s Key Features
Before diving into the device list, you need to understand what Matter 1.6 actually adds. There are three headline features that affect device compatibility:
NFC Commissioning lets you set up a device by tapping your phone to it. No QR code scanning, no manual code entry. Tap and pair. This is huge for devices installed in hard-to-reach spots (ceiling lights, in-wall switches, high-mounted sensors). Our deep dive on NFC setup covers the technical details.
Joint Fabric allows multiple smart home platforms to control the same device simultaneously without the current multi-admin workarounds. Your HomePod, Echo, and Google Home all share one fabric instead of each maintaining separate connections. We explain how Joint Fabric works in a separate guide.
Thermostat Suggestions is a new cluster that lets thermostats receive energy-saving suggestions from the platform. Think automated eco-mode recommendations based on occupancy, weather, and energy pricing.
For a broader overview of all changes, see our Matter 1.6 overview.
What’s NOT in Matter 1.6
Let’s be clear about what’s still missing from the Matter specification entirely:
- Cameras (still not supported)
- Robot vacuums (still not supported)
- Garage door openers (still not supported)
If you’re waiting for these device categories, you’re waiting for Matter 1.7 or later. Don’t hold off on buying a robot vacuum hoping for Matter support. Check our guide on whether to wait for Matter or buy now for device-by-device advice.
NFC Commissioning: Expected Devices
NFC commissioning makes the most sense on devices where scanning a QR code is physically annoying. Ceiling-mounted bulbs, in-wall switches, and door locks are the obvious first targets.
Confirmed or Highly Likely
Lutron (in-wall switches and dimmers): Lutron has been vocal about Matter support. Their next-gen Caseta and RA3 switches are expected to include NFC chips. Timeline: Q1 2027 for new hardware. Existing switches won’t get NFC (it requires a physical chip).
Eve (in-wall switches and sensors): Eve ships Thread-based devices already and has been a Matter early adopter since 1.0. Their Eve Light Switch and Eve Energy already have compact form factors. New revisions with NFC are expected in late 2026 or early 2027.
Nanoleaf (ceiling bulbs and panels): Nanoleaf’s Essentials line already supports Matter over Thread. Ceiling bulbs are a perfect NFC use case (you can’t easily scan a QR code on a bulb screwed into a ceiling fixture). Expect NFC-enabled revisions by mid-2027.
WiZ (Signify/Philips): WiZ bulbs run on Wi-Fi and already support Matter. New SKUs with NFC are a natural next step. Signify has the manufacturing scale to move quickly.
Schlage (door locks): The Schlage Sense Pro already has NFC hardware for key card access. Adding Matter NFC commissioning is a firmware update, not a hardware change. This could be one of the earliest devices to support the feature. Expected timeline: late 2026.
Yale/August (door locks): Similar to Schlage. Higher-end locks already have NFC readers. Firmware updates for Matter 1.6 commissioning are plausible within 12 months.
For a complete rundown of current Matter devices, check our Matter compatible devices guide.
Joint Fabric: Platform/Hub Updates Required
Joint Fabric isn’t a device-level feature. It requires your controller platforms (Apple Home, Google Home, Alexa, SmartThings) to update their hub firmware and cloud services. Here’s where each platform stands:
Apple (HomePod, Apple TV)
Apple typically rolls out smart home updates with major OS releases (September) or mid-cycle updates. A tvOS and HomePod firmware update supporting Joint Fabric is expected with tvOS 20 or a point release in late 2026. Apple was a founding member of the Matter working group and has pushed for multi-fabric improvements.
Google Home (Nest Hub, Nest speakers)
Google can push Joint Fabric support server-side for the cloud component. The local component requires firmware updates to Nest Hub (2nd gen), Nest Hub Max, and Nest speakers acting as Thread border routers. Google’s track record with Matter updates has been fast (they shipped Matter support ahead of schedule in 2022). Expected: early 2027.
Amazon Alexa (Echo 4th gen+, Echo Hub)
Amazon needs Echo firmware updates. They’ve historically been slower on Matter feature additions than Google or Apple, but Joint Fabric has clear customer benefit (Alexa users with mixed ecosystems). Echo 4th generation and newer, plus the Echo Hub, are the likely targets. Expected: mid-2027.
SmartThings (Station, Hub v3)
SmartThings has been aggressively pro-Matter. Their Station and Hub v3 already serve as Thread border routers and Matter controllers. Samsung typically pushes updates faster than the big three voice platforms. Expected: Q4 2026 or Q1 2027.
Understanding which hub handles what is critical. Our smart home hub comparison breaks down the differences between these platforms.
Thermostat Suggestions: Expected Devices
The Thermostat Suggestions cluster is narrower in scope. Only smart thermostats with cloud connectivity and energy-aware algorithms will implement this.
Ecobee (likely early adopter)
Ecobee already runs their eco+ program, which makes energy-saving adjustments based on occupancy, weather, and grid demand. The Thermostat Suggestions cluster maps almost perfectly onto what eco+ already does. Ecobee has been a consistent Matter supporter. Their Premium and Enhanced models are the candidates. Expected: firmware update in early 2027.
Google Nest Thermostat
Google controls both the platform (Google Home) and the device (Nest). That vertical integration means they can implement Thermostat Suggestions as a native feature without waiting for third-party coordination. The Nest Learning Thermostat (4th gen) and Nest Thermostat are candidates. Expected: alongside Google Home’s broader Matter 1.6 support.
Eve Thermo
Eve’s Thread-based European thermostat is a strong candidate. Eve has been the most aggressive third-party manufacturer with Matter adoption. The Eve Thermo already does local scheduling over Thread. Adding platform-level suggestions via Matter 1.6 is a logical extension. Expected: mid-2027.
For our full thermostat recommendations, see the best smart thermostat guide.
Complete Device/Platform Compatibility Table
| Device / Platform | Matter 1.6 Feature | Confirmed / Expected | Timeline |
|---|---|---|---|
| Schlage Sense Pro | NFC Commissioning | Expected (has NFC hardware) | Late 2026 |
| Eve Light Switch (new rev) | NFC Commissioning | Expected | Early 2027 |
| Lutron next-gen switches | NFC Commissioning | Expected (new hardware) | Q1 2027 |
| Nanoleaf Essentials bulbs (new rev) | NFC Commissioning | Expected | Mid 2027 |
| WiZ bulbs (new SKUs) | NFC Commissioning | Expected | 2027 |
| Yale Assure Lock 2 | NFC Commissioning | Expected (has NFC hardware) | Early 2027 |
| Apple HomePod / Apple TV | Joint Fabric | Expected | Late 2026 (tvOS update) |
| Google Nest Hub (2nd gen) | Joint Fabric | Expected | Early 2027 |
| Amazon Echo (4th gen+) | Joint Fabric | Expected | Mid 2027 |
| SmartThings Station / Hub v3 | Joint Fabric | Expected | Q4 2026 - Q1 2027 |
| Ecobee Premium / Enhanced | Thermostat Suggestions | Expected | Early 2027 |
| Google Nest Thermostat (4th gen) | Thermostat Suggestions | Expected | Early 2027 |
| Eve Thermo | Thermostat Suggestions | Expected | Mid 2027 |
Important Notes About Existing Devices
Every device currently certified for Matter 1.0 through 1.5 remains fully compatible. Matter is backward-compatible by design. Your existing smart plugs, lights, switches, and sensors continue working exactly as they do today.
The catch: existing devices need firmware updates to gain new 1.6 features. A Matter 1.3 light bulb won’t suddenly support NFC commissioning without a hardware revision (NFC requires a physical chip). Joint Fabric support on existing controllers may come via firmware, depending on the hardware’s capabilities.
Don’t throw away working devices. They’ll keep working. New features will come to new hardware first, and selectively to existing hardware where physically possible.
For help deciding what to buy right now versus what to wait for, our Matter compatibility guide has device-by-device recommendations.
What to Buy Today
If you’re shopping right now (June 2026), here’s the practical advice:
- Buy: Any Matter-certified device you need today. It won’t become obsolete.
- Wait: If you specifically want NFC setup on ceiling bulbs or in-wall switches, new hardware is 6-12 months away.
- Don’t wait: For Joint Fabric. Your existing hubs will get software updates. The devices themselves don’t need to change.
- Thermostats: Buy now if you need one. Thermostat Suggestions is a nice-to-have feature, not a reason to delay a purchase that saves you energy costs every day you use it.
The best smart sensors guide covers Matter-compatible sensors available today that won’t need replacement when 1.6 devices arrive.
Frequently Asked Questions
Will my current Matter devices stop working when 1.6 comes out?
No. Matter is fully backward-compatible. A device certified for Matter 1.0, 1.1, 1.2, or any version continues to work indefinitely. Newer features require newer firmware or hardware, but nothing breaks.
When will the first Matter 1.6 devices actually be available to buy?
Realistically, late 2026 for the fastest movers (likely Schlage and SmartThings) and mid-to-late 2027 for most categories. The certification process takes time, and manufacturers need to update hardware and firmware. NFC devices specifically require new hardware revisions.
Do I need a new hub for Joint Fabric?
Probably not. Joint Fabric is primarily a protocol-level change that existing hubs can support via firmware updates. Apple, Google, Amazon, and SmartThings all have hardware capable of running updated firmware. The updates just need to ship. If your hub is older than 2022, check manufacturer compatibility lists.
Can my existing thermostat get Thermostat Suggestions through an update?
If your thermostat already supports Matter (over Wi-Fi or Thread) and has cloud connectivity, a firmware update could add Thermostat Suggestions support. Ecobee and Google Nest are the most likely to push this update to existing hardware. Budget thermostats without cloud connectivity won’t qualify.
Should I wait for Matter 1.6 devices before building my smart home?
No. Build your smart home now with current Matter devices. The 1.6 features are quality-of-life improvements (easier setup, better multi-platform control, smarter thermostat behavior), not fundamental capability changes. A Matter 1.3 light switch does the same job as a Matter 1.6 light switch. The 1.6 version is just easier to set up initially.